One litre of X-Seal Acrylic-120C and catalyst.
Simply mix the Acrylic-120C and catalyst, then apply. It can be used with the spray gun (available separately) or applied by other methods.
Use the Spray Gun (sold separately). Requires dry 2 bar compressed air supply at 6cfm delivery - continuous application for 30 to 40 seconds.
The small photo (left) shows the Acrylic-120C container with a Spray Gun attached.
Around 4m³ per litre, depending on host substrate.
M1 Non-spray Applications: Pour 50ml of sealant A-120C into a beaker to 1 shot of catalyst DBP-10, stir and apply.
A1: Injection by hypodermic syringe A2: Drip feed by pipette A3. Pouring direct from mixing cup
M2 Spray Application (A4): 1. Pour total contents into sealant. 2. Attach can to spray gun. 3. Shake to mix 4. Apply
The Safety Data Sheet for X-Seal Acrylic-120C in .pdf format.
The Technical Data Sheet for X-Seal Acrylic-120C in .pdf format.